This modern Traditional longboard is the ultimate quest for the perfect high-performance longboard. Perfect combination of speed and maneuverability with its flat bottom and low 60/40 rails. The modern Traditional longboard has a flat rocker profile, so nose-riding and trimming is a breeze, but the tail has a hard edge, so the board turns with a more modern feel. The Traditional has a little wider nose and more tail area than some modern longboards, but the tail tucks in during the last foot to a 7” square tail. Triple stringers can also give the board a great balanced feel, and the tint or pigment lamination gives the board a classic look.You need a nice flat bottom in a longboard for speed and bite, eapecially when you are in trim position. But a full hard flat bottom with full down rails on a longboard just locks you in and won’t allow slipping and sliding that makes a longboard so much fun !


– Flatter rocker profile

– Pin tail , Squares and Rounded Pins

– Pinched 60/40 rails

– Rolled bottom Concave Nose

– 10 3/4” Future box fin

– Volan, tint or pigment lamination


9’0 x 22 1/2 x 2 5/8 = 62.9L

9’1 x 22 5/8 x 2 3/4 = 66.5L

9’2 x 22 3/4 x 2 3/4 = 66.5L

9’4 x 23 x 3 = 73.7L

9’6 x 23 1/2 x 3 1/8 = 80L


9” to 10″ Glass fin

pufcsfuturesEPS Epoxys